GNSS-AS, Splitter and Line Amplifier
GNSS-AS, Splitter and Line Amplifier

GNSS-AS, Splitter and Line Amplifier

ROGER™ GNSS Amplifier & Splitter is a combined signal splitter and line amplifier that can
transmit amplified signal to up to three separate repeater units. Amplifier has a gain of +16dB at the GPS L1/L2/GLONASS/GALILEO/BEIDOU frequency bands and it includes a filter to remove unwanted signals that may have entered the cable at some point.
Splitter is a one to three signal splitter that can transmit signal to up to three separate GNSS
(Global Navigation Satellite System) repeater units.

Amplifier is powered through the output signal cable by the ROGER™ GNSS Repeater and
it passes DC power forward to ROGER™ GNSS Splitter, another GNSS line amplifier or
GNSS receiving antenna.
The splitter & amplifier is easy to use and permits a wide range of system configurations.

Technical information

Size:

110*143*28mm

Weight:

195 g

Operating Temperature:

-25 - +55°C

Connectors:

TNC female input TNC female output

Frequency range:

1200-1700 MHz

Noise figure:

<5 dB

Impedance:

50Ω

Amplifier section Gain:

+16dB

Splitter section Gain:

N/A

Connector amount:

TNC female input, 3xTNC female output

Power supply:

The amplifier&splitter is powered through the RF input connector from the ROGER GNSS Repeater

Gain / Attenuation

1 x +12 dB with amplifier section / 1 x -4dB without amplifier section with DC input from repeater. And 2 x +4 dB with amplifier section / 2 x -12dB without amplifier section. DC blocked for repeaters.