roger gnss logo web
roger gnss logo web

ROGER GNSS Splitter 1to2 (GNSS-S2-IP67)

S2With the ROGER™ GPS Signal Splitter, is a signal splitter that is used to distribute GNSS signals to several Repeaters. Splitter works with GPS L1, GPS L2 and GLONASS frequency bands. It has one chaining output and two repeater outputs. DC power is passed on from the chaining output to the input connector for a line amplifier and to a GNSS receiving antenna. ROGER™ GPS Splitter is a one to two signal splitter with an output of -4 dB (2 ports) that can transmit a signal to up to two separate GNSS repeater units.

The splitter is easy to use and permits a wide range
of system configurations.

If the signal is to be transmitted to fewer than five or three repeaters, the unused ports should be terminated. Termination should be done with ROGER GPS Terminator 50 Ohm.

TECHNICAL SPECIFICATIONS

Size 200x119x39 mm  
Weight                        241 g  
Operating Temperature -40 - +75°C  
Connectors 1 x TNC female input, 2 x TNC female output. 1 x -4dB with DC pass and 1 x -4dB

 

Frequency range: 1200-1700MHz  
Impedance: 50Ω  
Power  Not required