roger gnss logo web
roger gnss logo web

ROGER GNSS Splitter 1to5 (GNSS-S-IP67)

S sideWith the ROGER™ GPS Signal Splitter, is a signal splitter that is used to distribute GNSS signals to several Repeaters. Splitter works with GPS L1, GPS L2 and GLONASS frequency bands. It has one chaining output and four repeater outputs. DC power is passed on from the chaining output to the input connector for line amplifier and a GNSS receiving antenna. 

ROGER™ GPS Splitter is a one to five signal splitter with an output of -4 dB (1 port) and -12 dB (4 ports) that can transmit a signal to up to five separate GNSS repeater units.

The splitter is easy to use and permits a wide
range of system configurations.




Size 200x119x39 mm  
Weight 355 g  
Operating temperature      -40 - +75°C  

TNC female input, 5xTNC female output. -4dB with DC pass, 4*-12dB

Frequency range: 1200-1700MHz  
Impedance: 50Ω  
Power  Not required
If the signal is to be transmitted to fewer than five or three repeaters, the unused ports should be terminated.
Termination should be done with ROGER GPS Terminator 50 Ohm.