roger gnss logo web
roger gnss logo web

ROGER GNSS Splitter 1to2 (GNSS-S2-IP67)

S2ROGER™ GPS Signal Splitter is a signal splitter that is used to distribute GNSS signals to several Repeaters. Splitter works with GPS L1, GPS L2, GLONASS , GALILEO frequency bands. It has one chaining output and two repeater outputs. DC power is passed on from the chaining output to the input connector for a line amplifier and to a GNSS receiving antenna. ROGER™ GPS Splitter is a one to two signal splitter with an output of -4 dB (2 ports) that can transmit a signal to up to two separate GNSS repeater units.

The splitter is easy to use and permits a wide range of system configurations.

If the signal is to be transmitted to fewer than two repeaters, the unused ports should be terminated. Termination should be done with ROGER GPS Terminator 50 Ohm.



220x148x39 mm

Weight                        385 g  
Operating Temperature -40 - +75°C  

1 x TNC female input
2 x TNC female output: 1 x -4 dB with DC pass and 1 x -4 dB


Frequency range: 1200-1700MHz  
Impedance: 50 ohm  
Power  Not required, the splitter is powered through the output / DC input connector by the Roger™ GPS repeater