roger gnss logo web
roger gnss logo web

ROGER GNSS Splitter 1to5 (GNSS-S-IP67)

S sideROGER™ GPS Signal Splitter is a signal splitter that is used to distribute GNSS signals to several Repeaters. Splitter works with GPS L1, GPS L2, GLONASS and GALILEO frequency bands. It has one chaining output and four repeater outputs. DC power is passed on from the chaining output to the input connector for line amplifier and a GNSS receiving antenna. 

ROGER™ GPS Splitter is a one to five signal splitter with an output of -4 dB (1 port) and -12 dB (4 ports) that can transmit a signal to up to five separate GNSS repeater units.

The splitter is easy to use and permits a wide
range of system configurations.

If the signal is to be transmitted to fewer than five repeaters, the unused ports should be terminated.
Termination should be done with ROGER GPS Terminator 50 Ohm.

 

TECHNICAL SPECIFICATIONS

Size 220x148x39 mm  
Weight 465 g  
Operating temperature      -40 - +75°C  
Connectors

1 x TNC female input
5 x TNC female output: 1 x -4 dB with DC pass, 4 x -12 dB

 
Frequency range: 1200-1700MHz  
Impedance: 50 ohm  
Power  Not required