companypage.jpg

ROGER GPS

 products are designed and manufactured in Finland.


ROGER GPS Repeater Package (GPSR-BP)

A single ROGER GPS Repeater Package is enough to provide a GPS indoor coverage area of 30 metres in diameter from the repeater. Mount the external antenna on the roof of the building and connect the cable (RG58), supplied with the kit, to the antenna and to the repeater installed indoors.

Connect the power supply unit to the repeater, adjust the repeater's transmission power according to the local conditions, to prevent a signal loopback, and indoor GPS coverage is immediately available. The kit includes clear installation instructions and a pre-completed application for a radio license.

Several ROGER GPS Repeater Packages can be installed in the same building. Alternatively, the signal coverage provided by a single package can be extended with ROGER GPS Accessories, such as line amplifiers and signal splitters.

repeaterBp

Repeater unit

Each ROGER GPS repeater is capable of transmitting the GPS signal over an area 30 metres in diameter. Every repeater unit is supplied with a mains power supply unit with a 1.9 metre cable. The device has been CE certified in 2008.

Antennabullet

Outdoor GPS antenna

Whatever the environment - wet, cold, sunny, hot, harsh RF jamming GPS antenna included in the box can take it, year after year. The antenna is housed in completely waterproof packaging designed to withstand exposure to shock, excessive vibration, extreme temperatures, rain, snow and sunlight. The enclosure is a textured off-white colour and is both weatherproof and waterproof. The dome is all plastic, and the threaded socket in the base of the antenna is corrosion resistant.

Important!

The antenna supplied with the basic repeater package has an whopping RF gain of 35 dB, which results in a cable loss budget of approximately -20 dB. The Roger GPS repeater system needs ~ 15 dB RF gain from the antenna including cable losses for best performance. If using different antenna, the loss budget for repeater must be calculated to make sure – 20 dB of link loss is not exceeded!

 

 

Antennamount

GPS antenna mount

The antenna mount supplied with the ROGER GPS Repeater kit is very useful for mounting antenna different kind of installation locations. With this antenna mount GPS antenna is easily mounted to any surface, and at any angle.

cabel

Cable

The cable supplied with the ROGER GPS Repeater kit is the standard RG58 type. The cable can be used to make a connection over a maximum distance of 19,5 metres. Longer connections using this type of cable cause considerable signal attenuation. If the length of the cable from the external antenna to the repeater is over 20 metres, there are two options: a) A better cable type, b) Use a line amplifier. All the most common cable lengths and types are available from stock. Ask for other lengths as well.

 

 

Technical Specifications

Size 110*143*28mm  
Weight 165 g
 
Overall Gain
> 40dB  
Noise Figure
< 2dB  
Variable attenuation 0-40dB  
Impedance
50Ω  
Input connector
SMA-female
 
Operating temperature -25 - +40°C  
Power supply 9VDC, 300mA
Power supply included
Indoor coverage radius 10-15m  
Antenna power output
+5VDC, 100mA  
TX antenna gain 
max +4dBd, RHCP polarization  
Other features
   
Automatic gain control
Output power limit –60dBm
 
Feedback oscillation suppression
Status/power LED  
Manual gain control
Internal transmit antenna
 
CE-certified
Yes  

What's in the box

  • Outdoor antenna for receiving the GPS signals
  • Antenna mount and adapter for cables
  • ROGER GPS Repeater unit
  • Power supply
  • RF-cabling, 19,5m
  • Manual

rogerpack

 
Where to buy

Find a distributor here.

Or send e-mail: 
roger@sparklike.com

Specifications
rogerrep.jpg

Download here.

Full Manual

manualv2.jpg

Download here.

Accessories

Available accessories for the most efficient usage of the device include also line amplifier, signal splitters and RF cabling.