ROGER GNSS Splitter&Amplifier Package (GNSS-L1G1GA-SAP or GPSR-SAP)
To extend the coverage area provided by the ROGER GNSS Repeater Package, use the complete ROGER GNSS Repeater Splitter & Amplifier extension kit that includes cable, 1 line amplifier, 2 repeater units, alternatively with Galileo/GPS/Glonass repeater OR GPS L1 repeater, depending on your needs and a new signal splitter/line amplifier.
With this installation kit, two extra repeaters can be added to the ROGER GPS Repeater Package to provide greater indoor satellite signal coverage. If necessary, a repeater can be installed up to 43 metres away from the outdoor antenna. The extension kit is easy to integrate with an existing system that comprises an external antenna and indoor repeater.
If the signal is to be transmitted to fewer than five or three repeaters, the unused ports should be terminated. Termination should be done with ROGER GPS Terminator 50 Ohm.
|Overall Gain||> 40dB|
|Noise Figure||< 2dB|
|Operating temperature||-25 - +55°C|
|Power supply||12VDC, 300mA||Power supply included|
|Indoor coverage radius||10-15m|
|Antenna power output||+5VDC, 100mA|
|TX antenna gain||max +4dBd, RHCP polarization|
|Automatic gain control||Output power limit –60dBm, 0,000001mW|
|Feedback oscillation suppression||Status/power LED|
|Manual gain control||Internal transmit antenna|
What's in the box
- 1xROGER GNSS Amplifier&Splitter (GNSS-AS)
- 1xROGER GNSS Amplifier (GNSS-A)
- 2xROGER GNSS Repeater unit (GNSS-L1G1GA) or 2xROGER GPS Repeater unit (GPSR-1)
- 1x3 m TNC-m/TNC-m
- 1x20 m TNC-m/TNC-m
- 1x25cm TNC-m/TNC-m
- 2x20 m TNC-m/SMA-m